Professional Compatible Dental Type 15 Increasing
Contra Angle Handpiece
Fiber Optic 1:5 Increasing Handpieces Description
Forever evolving, DR-15FH, their dominating productivity and remarkable durability make them the most popular models in the lineup. 200,000 rpm speed range lets you complete the most intricate restorative work with incredible accuracy – and on your own terms.
Fiber Optic 1:5 Increasing Handpieces Technical parameter
| Water Spray | 4 water spray |
| Spray | inner water spray |
| Gear Ratio | 1:5 Increasing |
| Cartridge | Cramic cartridge |
| Speed | 200,000Rpm |
| Water Pressure | 0.08 - 0.20MPa (0.8 - 2.0kgf/cm 2 ) |
| Noise | 60-65dB |
| Paking | 1pcs/box |
| Disinfection | autoclavoble to 135 ℃ |
Fiber Optic 1:5 Increasing Handpiece Details
| 
Inner water channel , quattro spray system
4 points water spray, keep best cooling effect all time. Spray accurately to the bur, ensure an excellent cooling performance. |
|
Use hight quality imported fiber optic Ensure light brightly enough for long time working. |
| 
Powerful compatibility matching multiple brands of electric motor system |
| 
rear cover make sure more than 20000 push； recommended pressure:2 to 3 N |
Our services:
1,100% pre-tested before delivery. 1:1 replacement for any defective caused by our factory.
2,Specialized in exporting dental equipment with professional sales team. Excellent customer service and technical support.
3,If the product doesn't work please let us know the order number and send the photos/video. After confiming, we will ship a new one to you or return the money back.
4,Please do not hesitate to contact us if you need assistance on your item problem, our online technical support will be there with you in 24 hours
After each patient use , maintenance should be done as follows:
1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate
2. Use a metal needle to clean the spray holes and fumaroles
Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle
3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )
4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom
5. The handpiece with quick connector combination ( first determine the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )
7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain
8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization
|
|
Professional Compatible Dental Type 15 Increasing Contra Angle Handpiece Images
|
